Typical Application: General Injection products
(e.g. pallets, table, chairs, small parts, etc)
Source: Beverage Cups
Dosage:Up to 100% in Injection Moulding
Colour: Black
Typical Properties | Test Method | Unit | Value |
---|---|---|---|
Melt point | DSC | °C | 130 |
Melt flow rate (230 °C, 2.16kg) | ASTM D1238 | g/10min | 6 - 9 |
Density | ASTM D792 | g/cm3 | 0.9 |
Shore Hardness | ASTM D2240 | Shore D | 67 |
Tensile Strength at yield | ASTM D638 | Kg/cm² | 240 |
Flexural Modulus | ASTM D790 | Kg/cm² | 6900 |
IZOD Impact strength, notched, 23 °C | ASTM D256 | Kg-cm/cm | 5.5 - 7 |
Ash content | ASTM D5630 | % | 1.8 |
Elongation at yield | ASTM D638 | % | 180 |