Typical Application: General Injection products
(e.g. pallets, table, chairs, small parts, etc
Source: Beverage Cups
Dosage:Up to 100% in Injection Moulding
Colour: Natural
Typical Properties | Test Method | Unit | Value |
---|---|---|---|
Melt point | DSC | °C | 130 |
Melt flow rate (230 °C, 2.16kg) | ASTM D1238 | g/10min | 3 - 4 |
Density | ASTM D792 | g/cm3 | 0.90 |
Shore Hardness | ASTM D2240 | Shore D | 70±1 |
Tensile Strength at yield | ASTM D638 | Kg/cm² | 310 |
Flexural Modulus | ASTM D790 | Kg/cm² | 8400 |
IZOD Impact strength, notched, 23 °C | ASTM D256 | Kg-cm/cm | 5 - 8 |