PE-A6 HDPE, Pipe, Repro
Typical Application: Pipe, Blow Moulding
Source: Shampoo Bottles, Mobil Bottles
Dosage:Up to 100% in Pipe, Blow Moulding
Colour: Black
| Typical Properties | Test Method | Unit | Value |
|---|---|---|---|
| Melt point | DSC | °C | 130 |
| Melt flow rate (2.16kg) | ASTM D1238 | g/10min | 0.2 - 0.3 |
| Density | ASTM D1505 | g/cm3 | 0.955 |
| Shore Hardness | ASTM D2240 | Shore D | 65D±1 |
| Tensile Strength at yield | ASTM D638 | Kg/cm² | 150 |
| Elongation at Break | ASTM D790 | % | 110 |
| IZOD impact strength, notched, 23 | ASTM D256 | Kg-cm/cm | 30 |
| Ash content | ASTM D5630-94 | % | < 0.96 |
| Volatile Content | -- | % | < 0.15 |