PBR-CO Injection Moulding, PP Copo, Repro
Typical Application: Chairs, Tables
Source: General PP Injection Items
Dosage:Up to 100%
Colour: Grey
| Typical Properties | Test Method | Unit | Value |
|---|---|---|---|
| Melt flow rate (230°C, 2.16kg) | UNI EN ISO 1133 | g/10min | 8 - 10 |
| Density (23°C) | UNI EN ISO 1183-1 | g/cm³ | ≥ 0.920 |
| Yield Strength | UNI ISO 527 | Mpa | 23 |
| Elongation at yield | UNI ISO 527 | % | 430 |
| Flex Modulus | UNI ISO 178 | Mpa | 1150 |
| Charpy Impact | UNI ISO 180 | 23° kJ/m2 | 5.6 |
| Vicat | UNI ISO 306 | °C | 73 |
| Filtered | IOP-04 | Micron | 1000 |