B3001 Blow Moulding, HDPE, Repro
Typical Application: Blow Moulding, Blow Film, Pipes
Source: Milk Bottles
Dosage:Up to 100% in Blow Moulding, Blow Film
Colour: Natural
| Typical Properties | Test Method | Unit | Value |
|---|---|---|---|
| Melt point | DSC | C | 130 |
| Melt flow rate (2.16kg) | ASTM D1238 | g/10min | 0.2 - 0.25 |
| Density | ASTM D1505 | g/cm3 | 0.955 |
| Shore Hardness | ASTM D2240 | Shore D | 66D±1 |
| Tensile Strength at yield | ASTM D638 | Kg/cm² | 310 |
| Flexural Modulus | ASTM D790 | Kg/cm² | 210 |
| IZOD Impact strength, notched, 23C | ASTM D256 | Kg-cm/cm | 50 |
| Ash content | ASTM D5630-94 | % | < 0.05 |
| Volatile Content | -- | % | 0.2 |